Litokol X-Wax maintenance wax | For porcelain stoneware and natural stone | 3 × 1 l | covers approx. 75 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
X-Wax Gres + Stone, matt protective wax for easy-care indoor surfaces
X-Wax Gres + Stone is a maintenance wax for indoor floors made of rough ceramic, textured porcelain stoneware, natural stone, cotto or terracotta. The water-based protective wax smooths the surface effect, reduces dirt adhesion and protects against oil, grease and drink stains.
Your benefits at a glance
- Natural, matt appearance without yellowing.
- Stain- and dirt-repellent protection that makes routine cleaning easier.
- Suitable for rough, textured indoor surfaces with medium to high absorbency.
- Water-based formulation with economical coverage.
Applications and use
For dry indoor floor and wall surfaces. Pretreat highly absorbent materials such as cotto, terracotta or cement tiles with X-Protector Gres + Stone.
On compact, low-absorbency coverings, dilute 1:1 with water. Apply a thin, even coat in one direction; spread out any accumulations. On highly absorbent surfaces, a second coat may follow after approximately 2 hours.
Important: Use only on clean, dry surfaces that are not overheated. The product is intended for indoor use; always check the effect and appearance on a sample area.
Included in delivery and expert advice
Included in delivery: 3 bottles of 1 l. Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we personally assess your substrate, application and requirements before you order, free of charge.
Technical times and consumption figures apply under standard conditions. Temperature, humidity, substrate and application method may affect actual values.
Technical data
| Parameter | Value |
|---|---|
| Product type | Water-based, matt protective wax |
| Area of use | Indoors |
| Working time | approx. 5 to 10 minutes |
| Consumption | approx. 20 to 30 m²/l |
| Coverage of this offer | approx. 60 to 90 m² |
| Dilution on compact surfaces | 1 : 1 with water |
| Second coat | if needed, after approx. 2 hours |
| Ready for foot traffic | approx. 4 to 6 hours |
| Application temperature | +5 °C to +35 °C |
