Litokol FastGel® S1+ Grigio | Flexible rapid tile adhesive in grey, ready for use after 12 h | 40 kg (2 × 20 kg) for approx. 13.3 m²
- 40 kg per sales unit (2 × 20 kg bags), approx. 13.3 m² at 8 mm
- Walkable after 3 hours
- Ready for grouting after 3 hours
- Ready for use after 12 hours
Values at +23 °C and 50% relative humidity, without draughts. Site conditions affect these times. Waterproofing, grout and sealants have their own waiting times; this does not permit pool filling after 12 hours.
1 sales unit = 40 kg = 2 bags of 20 kg
Both bags in the colour you selected. Quantity 2 = 4 bags (80 kg). Single bags are not available.
Litokol · FastGel® S1+ GrigioFlexible rapid adhesive C2 FTE S1 in grey for large formats & underfloor heating
A shop that has to be retiled overnight, a balcony over an old covering, large slabs on underfloor heating: where surfaces need to return to everyday use quickly and the substrate moves, tiling needs speed and reserve at the same time.
FastGel® S1+ is a flexible, crack-resistant tri-polymer gel: walkable and groutable after 3 hours, ready for use after 12 hours in standard conditions, in grey ideal under muted and dark coverings, with uncompromising performance right into the adhesive bed.
- Walk & grout after 3 h
- In use after 12 h
- Flexible & crack-resistant
- Grey for muted coverings
- Bathrooms, showers & wet rooms
- Pools, basins & fountains
- Terraces & balconies
- Spa & hammam
- Tile on tile & underfloor heating
- Façades
- Commercial & public areas
- Industrial floors & heavy-duty areas
- Large formats & thin slabs
- Porcelain stoneware & ceramic tiles
- Natural stone & marble
- Terracotta & clinker
- Screeds & levelling compounds
- Plaster, plasterboard & aerated concrete
- Existing tiles & underfloor heating
- Concrete & fibre cement
- SafetyGel® & waterproofing
- Uncoupling membranes
- Gypsum and anhydrite only with X-Prime® and checked residual moisture, not on wood, metal, PVC or RM waterproofing
All times apply at +23 °C, 50 % relative humidity and without draughts; site climate and substrate will change them. Grouts and waterproofing may require longer waiting times, and the 12 hours are no approval for filling a pool. Outdoors, lay with full coverage and protect from heavy rain for 12 hours.
Flexible powder gel in 2 bags of 20 kg (40 kg) in grey (Grigio), creamy and stable on floors and walls:
- Mixing4.6 to 5.2 l water per 20 kg bagleave to rest for 5 minutes, then stir briefly
- Application temp.+5 °C to +35 °Cpot life of the mix 60 minutes
- Open timeover 45 minutestime after spreading, bed thickness 1 to 20 mm
- Walk & groutafter 3 hoursgrouting on walls and floors, standard conditions
- Ready for useafter 12 hoursalso observe the waiting times of grout and waterproofing
- Shelf life12 monthsstore dry in the original packaging
Performance that lasts
- 3 hwalkable and groutable at +23 °C and 50 % RH
- 12 huntil ready for use in standard conditions
- C2 FTE S1deformable and rapid-setting according to EN 12004
- −40 to +90 °Ctemperature resistance in service
Coverage and quantity
One 40 kg sales unit (2 × 20 kg) covers approx. 13.3 m² with an 8 mm notched trowel. Coverage mainly depends on the notch size and application.
6 mm notch: approx. 16 m² per 40 kg.
8 mm notch: approx. 13.3 m² per 40 kg.
10 mm notch: approx. 11.4 m² per 40 kg.
With double buttering, i.e. also applied to the back of the tile, one sales unit covers approx. 8 m². Further consumption figures can be found in the technical data sheet.
Delivery
3–7days delivery time, express on request only
Each sales unit contains 2 bags of 20 kg (40 kg), both in grey. Single bags are not available. For light coverings, the same formula is available in white as FastGel® S1+ Bianco.
Advice
Free of chargepersonal expert advice
Unsure about the substrate, large format or waiting times before grouting? We will advise you personally on +49 40 22851287 and match adhesive, waterproofing and grout to your project.
Waterproofing · TileSafe®SafetyGel®Elastic, crack-resistant gel membrane that together with FastGel® S1+ forms the TileSafe® system for large formats, even on cracked substrates up to 3 mm, whereby the membrane must be fully dry before bonding.View product →
Grout · epoxyStarlike® ProEpoxy grout in 75 colours, for the highest demands on the aesthetics and performance of the joint: it grouts the covering flexibly bonded with FastGel® S1+ colourfast and chemically resistant, with its own waiting times applying to grouting and use.View product →
Silicone · connection jointPixel® 3DSanitary silicone in 20 colours for perimeter, connection and expansion joints on ceramic coverings laid with FastGel® S1+, while Pixel® 3D-N is the right alternative for natural stone.View product →
Since its foundation in Rubiera, Italy, in 1968, Litokol has developed systems for laying tiles and natural stone, from substrate preparation, adhesives and waterproofing to grouts and care. New formulations are created in the company’s own research laboratory, Litokol L-Lab.
View reference projectsWe are always happy to help and will support your project from the substrate to the last tile, so that your surfaces can be used again quickly.
Back to top