Litokol HydroPixel® sealant | Hybrid sealant for pools, showers & expansion joints | 12 × 290 ml | for approx. 93 linear metres of joints
- Quality by Litokol®
- Delivery in 3-7 days (express available)
HydroPixel®, flexible bonding and sealing, even on damp substrates
HydroPixel® is an elastic pool sealant for expansion joints and a versatile hybrid adhesive and sealant for indoor and outdoor areas. It bonds to many common building materials without primer, remains permanently flexible and, according to the data sheet, is also suitable for wet and underwater bonding.
Your benefits at a glance
- Bond, join and seal with a single ready-to-use product.
- High adhesion to many typical construction and industrial materials, even on damp substrates.
- Free from solvents and isocyanates; overpaintable with many water-based and solvent-based paints after a preliminary test.
- For swimming pools, façades, balconies, terraces, sanitary areas and heavily used surfaces.
Applications and use
Suitable for elastic connection and movement joints, and for bonding and sealing work on floors and walls. The substrate must be sound and free from bond-breaking residues; level very rough surfaces beforehand.
Cut the cartridge nozzle to the desired joint width, apply the material without air bubbles, press firmly and smooth within the open time. Ensure adequate ventilation during moisture-dependent curing and secure bonded components if necessary.
Important: Do not use on bituminous waterproofing sheets, rubber or resin-treated substrates. Always test paints and unfamiliar materials beforehand.
Included in delivery and expert advice
Included in delivery: 12 cartridges of 290 ml. Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we personally assess your substrate, application and requirements before you order, free of charge.
Technical times and consumption figures apply under standard conditions. Temperature, humidity, substrate and application method may affect actual values.
Technical data
| Parameter | Value |
|---|---|
| Product type | Moisture-curing adhesive and sealant |
| Open time | approx. 20 minutes |
| Full cure | approx. 3 mm in 24 hours |
| Tensile strength | ≥ 2,6 N/mm² |
| Modulus of elasticity at 100 % | ≥ 1,8 N/mm² |
| Walkable after | approx. 24 hours at +23 °C |
| Ready for use | approx. 5 days at +23 °C |
| Application temperature | +5 °C to +35 °C |
| Service temperature | -30 °C to +90 °C |
| Packaging | 12 × 290 ml |
