Litokol Pixel® Precision Two-component adhesive gel | For steps, edges and mitre joints | 215 ml
- Quality by Litokol®
- Delivery in 3-7 days (express available)
Litokol · Pixel® PrecisionTwo-component adhesive gel for steps, edges & mitre joints in stone and porcelain
Natural stone stairs, a porcelain kitchen edge or a neatly finished vanity mitre: edges reveal whether a project has been built with attention to detail. No joint should stand out and no corner should give way.
Ordinary adhesives cure slowly and can be difficult to finish. Pixel® Precision bonds and fills joints in one gel, ready for cutting and polishing after 45 to 60 minutes, with uncompromising performance and Italian design right into every edge.
- Ready for polishing in 1 hour
- UV-resistant
- Waterproof
- 6 colours
- Stairs & steps
- Corners, edges & mitre joints
- Kitchen worktop & vanity edges
- Outdoor stairs, balconies & terraces
- High-traffic floors
- Bonding & joint filling in one
- Porcelain tiles
- Ceramic tiles
- Large-format tiles
- Laminated porcelain
- Marble & granite
- Natural stone
- Glass & ceramic mosaic
- Quartz & resin composites
- Adhesion without primer, indoors & outdoors
Before bonding, lightly abrade glossy or very smooth surfaces and discard the first 5 cm of gel after fitting the mixing nozzle.
Two components in a 215 ml cartridge, automatically dispensed in a ratio of 2:1 through the mixing nozzle: consumption depends on the cross-section and length of the bonded area, as well as losses in the mixing nozzle.
- Coveragedepends on joint sizeThe width and depth of the adhesive joint determine the quantity required
- Application temperature+5 °C to +30 °CCuring from +1 °C
- Gel time3 to 5 minutesposition within this time
- Cured after25 minutesat +23 °C
- Ready for polishing after45 to 60 minutescutting, sanding and polishing
- Shelf life24 monthsCrystal 20 months; store frost-free and away from light
Lasting performance
- 10 MPaAdhesion to ceramic tiles after just 1 hour
- −25 to +60 °CService temperature range
- Shore D 80hard surface that can be sanded and polished
- UV-resistantwaterproof, dirt-repellent and weather-resistant
Matched to Lissoni colours
6colours available from Tiamont
Five colours have the same numbers and names as Pixel® 3D and Starlike® Pro, from light Sabbia Bianca to deep Nero Antico. They are joined by Crystal, a transparent option for glass, onyx and light-coloured stone where the adhesive joint should remain discreet.
Our design recommendation
We are happy to provide personal design advice for every project. We coordinate adhesive gel, grout and stone so edges and mitre joints look as if they were made from a single block.
Colour display note: the swatches are based on the original colour chart. Actual shades may vary slightly depending on your screen, its calibration and the lighting on site.
Tap a colour to view it at full width.
-
02
Sabbia Bianca
-
08
Terra di Bruma
-
10
Ardesia
-
12
Nero Antico
-
21
Calce di Marrakech
-
00
Crystal
Delivery
3–7days delivery time, express delivery on request
You receive one 215 ml two-component cartridge in your chosen colour.
Advice
Freepersonal expert advice
Unsure about the colour, material or quantities required? As an authorised Litokol specialist retailer, we offer personal advice on +49 40 22851287 and put together the right system for you, from installation to care.
Adhesive · epoxy resinPowerGel® Pro Ultra BiancoTwo-component epoxy adhesive in Ultra Bianco and Grigio for large-format tiles and natural stone of any size: it bonds stair and floor slabs across their full area without staining, while Pixel® Precision closes edges and mitre joints precisely in minutes.View product →
Grout · epoxy resinStarlike® ProEpoxy resin grout in 75 colours, including all Lissoni shades of Pixel® Precision with matching colour numbers: the surface and edge share the same colour, meeting the highest demands for appearance and grout performance, waterproof in joints from 1 to 20 mm.View product →
Care · slip resistanceX-GripWater-based anti-slip treatment in a 1 l bottle covering 15 to 20 m², without a film or residue: it improves long-term slip resistance on stone, porcelain and granite steps, particularly outdoor stairs whose edges are formed with Pixel® Precision.View product →

Founded in 1968 in Rubiera, Italy, Litokol stands for outstanding performance and Italian design, continually developed in its in-house research laboratory, Litokol L-Lab. Prestigious establishments around the world, including Cheval Blanc Paris, the House of Dior in London and the Tiffany & Co. boutique in Milan, trust Litokol.
View reference projects →
