Litokol X-Tone Matt | Matt colour enhancer for natural stone and porcelain stoneware | 2 × 1 l | covers approx. 35 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
X-Tone Matt, matt colour enhancement with integrated stain protection
X-Tone Matt is a matt colour enhancer for natural stone, ceramic and joints with integrated stain protection. The water-based impregnator intensifies and evens out colour without forming a glossy surface film.
Your benefits at a glance
- Matt colour enhancement and stain protection in one step.
- For absorbent natural stone, cotto, concrete, pebbles, ceramic and suitable composites.
- Suitable for refreshing the appearance of cement and epoxy joints.
- UV- and weather-resistant for dry indoor and outdoor surfaces.
Applications and use
For clean, dry surfaces that are not overheated. As the colour is visibly enhanced, assess the visual effect on a sample area first.
On absorbent surfaces, apply undiluted in a thin coat; repeat after 2 to 3 hours if needed. On low-absorbency substrates, dilute 1:1 or 1:2 with water and remove all excess after approximately 5 minutes.
Important: Wait for freshly laid or grouted surfaces to cure fully. Do not work in direct sunlight; apply only to completely dry surfaces.
Included in delivery and expert advice
Included in delivery: 2 bottles of 1 l. Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we personally assess your substrate, application and requirements before you order, free of charge.
Technical times and consumption figures apply under standard conditions. Temperature, humidity, substrate and application method may affect actual values.
Technical data
| Parameter | Value |
|---|---|
| Product type | Matt colour enhancer and protective impregnator |
| Working time | approx. 5 to 10 minutes |
| Consumption | approx. 15 to 20 m²/l |
| Coverage of this offer | approx. 30 to 40 m² |
| Dilution on low-absorbency surfaces | 1 : 1 or 1 : 2 with water |
| Second coat | if needed, after 2 to 3 hours |
| Ready for foot traffic | after approx. 4 hours at the earliest |
| pH value | 6.5 to 7.5 |
| Application temperature | +5 °C to +35 °C |
