Litokol X-Tone Satin | Satin colour enhancer for natural stone | 3 × 1 l | covers approx. 38 m²
- Quality by Litokol®
- Delivery in 3-7 days (express available)
X-Tone Satin, gentle colour enhancement with a controlled satin effect
X-Tone Satin is a satin colour enhancer for textured natural stone and ceramic surfaces. The water-based protective impregnator refreshes colour with a controlled satin effect while protecting against oil, grease, drinks and dirt.
Your benefits at a glance
- Controlled satin effect for a well-maintained, subtly enhanced surface.
- Repels stains and dirt without forming a continuous surface film.
- UV- and weather-resistant for dry indoor and outdoor surfaces.
- Suitable for natural stone, pebbles and rough, textured or bush-hammered materials.
Applications and use
For raw, textured coverings with medium to high absorbency. Do not use on glossy, smooth or polished surfaces. Prepare a test area first to assess the colour and satin effect.
Apply undiluted in a thin, even coat using a brush, roller or nonwoven pad. Avoid excess; if a second coat is desired, wait 2 to 3 hours. Allow 4 to 6 hours after the final coat before foot traffic.
Important: Work only on completely clean, dry surfaces that are not overheated. Freshly laid or grouted coverings must be fully cured.
Included in delivery and expert advice
Included in delivery: 3 bottles of 1 l. Delivery time: Delivery time: 3-14 working days. Free shipping.
Tiamont is an official Litokol specialist retailer in Germany. On request, we personally assess your substrate, application and requirements before you order, free of charge.
Technical times and consumption figures apply under standard conditions. Temperature, humidity, substrate and application method may affect actual values.
Technical data
| Parameter | Value |
|---|---|
| Product type | Colour-enhancing protective impregnator with satin effect |
| Working time | approx. 5 to 10 minutes |
| Consumption | approx. 10 to 15 m²/l |
| Coverage of this offer | approx. 30 to 45 m² |
| Second coat | after approx. 2 to 3 hours |
| Ready for foot traffic | approx. 4 to 6 hours |
| pH value | 8 to 9 |
| Application temperature | +5 °C to +35 °C |
| Packaging | 3 × 1 l |
